Jerry's Leather Stripper

Heavy duty Leather Stripper cuts strips of leather and some types of bark from 1/8" to 3" wide. Not designed to use for splitting cedar bark.

Stripper has twenty-five 1/8" spacers; alternate black and white. Each spacer holds a blade, which allows you to cut one to 24 strips at a time in 1/8" multiples. Blades are easily changed and can be reversed when they become dull.  A clamp, which anchors the piece to your work table for easier cutting (see photo), is built into the stripper. Stripper comes with 5 blades, an extra hold-down lever and complete instructions.

Also included are free instructions for braiding the 'Mystery Belt', a leather belt that is closed at both ends yet braided in the middle.

Not designed to use for splitting cedar bark.

 NOTE:  Not designed to use for splitting cedar bark.
If you are using this for cedar bark you must use the screw described in Step #1 in the instructions.  Add an extra hole in the side of the metal frame by drilling a 1/8” hole positioning it over the ‘Y’ in the Jerry’s.  Then add an extra screw to the side for added support.  If this is not done when using for cedar there will be no replacement for the product. (This is a leather stripper.)