Insta-Cure Glue and Insta-Set Accelerator make it Easy to Glue Reed.

Watch the video and follow the instructions below to learn how to make a quick and easy glue joint.

Purchase Insta-Cure Glue and Insta-Set Accelerator here.

Carefully put a small drop of glue on your reed.

Position the two pieces of reed.

Hold the two pieces of reed and clamp with an alligator clip.

The two pieces are now securely clamped.

You have a few seconds to re-position the reed if necessary.

With the reed clamped in the desired position, spray the assembly with accelerator.

Let the assembly cure for about 10 seconds.

The glued pieces are now ready to use.

NOTE: Test the glue joint. Sometimes the glue joint will fail at this point - just repeat the process until the glue joint is secure.